sm sff p roduct b rief never stop thinking. applications line cards for the backbone infrastruc- ture of internet and public switched networks (sonet/sdh/atm networks) high-speed server applications internet traffic management products high speed router digital and optical cross connects add/drop multiplexer terminal multiplexer broadband/catv features data rates from 100 mb/s up to 2.5 gb/s 1310 nm fp or dfb laser 3.3 v power supply 2by5 or 2by10 msa compatible footprint lc connector half the size of current 1x9 sc transceiver full shielded for best emi performance tx and rx monitoring functions distances up to 15 km (40 km on oc-3) can be covered applied standards itu-t g.957 stm atm forum bellcore sonet/sdh documentation and support package data sheets cross reference samples qualification report test boards certifications ul 94 v-0 fcc (class b) and en 55022 class 1 fda iec laser safety compliant sm sff transceiver sonet/sdh/atm small form factor (sff) transceiver lc connector oc-3, oc-12, oc-48, single mode 1310 nm, 3.3 v infineon's small form factor lc transceiver family is designed for single mode fiber applications operating at 1310 nm wavelength within synchronous optical networks. the wide range of products covers data rates from 100 mb/s up to 2500 mb/s by transmitting and receiving light over distances up to 40 km. its narrow width design enables hardware designers to fit up to 32 modules on to a single line card. all units comply with the latest sonet/sdh standards and meet fda laser class 1. they come in a fully shielded package to provide best prevention against emi radiation. www.infineon.com/fiberoptics
p roduct b rief how to reach us: http://www.infineon.com published by infineon technologies ag, st.-martin-strasse 53, 81541 mnchen ? infineon technologies ag 2002. all rights reserved. attention please! the information herein is given to describe certain components and shall not be considered as warranted characteristics. terms of delivery and rights to technical change reserved. we hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. infineon technologies is an approved cecc manufacturer. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office in germany or our infineon technologies representatives worldwide. warnings due to technical requirements components may contain dan- gerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life- support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-sup- port device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered. published by infineon technologies ag availability now in production ordering information pluggable oc48 modules available (v23818-n15-b57) as well as a complete line of transceiver modules for datacom applications. options dc coupled modules extended operating temperature (-40c to +85c) collar free version mu package 2by5 pin-out please refer to data sheets for detailed ordering information data rate part number for 2by10 ac coupled modules 155 mb/s v23818-c18-l47 (only 2by5) 622 mb/s V23818-H18-L47 2.5 gb/s v23818-n15-l353 block diagram automatic shut-down laser driver power control laser e/c c/e laser coupling unit rx coupling unit c/e receiver monitor len rd+ rd sd td+ td txdis multimode fiber ordering no. b159-h8002-x-x-7600 printed in germany ps 02023. nb the transmitter converts lvpecl compatible electrical serial data into optical serial data. the transmitter contains a laser driver circuit that drives the modulation and the bias cur- rent of the laser diode. the currents are controlled by a power control cir- cuit to guarantee constant output power of the laser over temperature and aging. the receiver component converts the optical serial data into lvpecl compatible electrical data. contacts north america: jeff mold phone: +1-978-740-0745 email: jlmold@concentric.net guenther feuereisen phone: +1-408-501-5739 email: guenther.feuereisenus@infineon.com europe: sabine warzecha phone: ++49-30-386-24860 email: sabine.warzecha@infineon.com asia: owen chui phone: ++852-2832-0480 email: owen.chui@infineon.com japan: kunikazu watanabe phone: ++81-3-5449-6705 email: kunikazu.watanabe@infineon.com
|
